Feeding and cutting molybdenum sheet mechanism
When producing the filament for lamps, tungsten wire is usually used as the filament material, and then molybdenum sheets are welded on the two feet of the tungsten wire.
Because the molybdenum strip and tungsten wire are small objects, in the preparation of the filament, manual operation is easy to make the work efficiency is low, resulting in a high scrap rate, and the size difference of the produced filament is large, the shape is different, seriously affecting the service life of the filament and the accuracy of the halogen lamp power.
Through the movement of molybdenum sheet guide rail to the molybdenum sheet in the molybdenum channel for transportation, molybdenum sheet component can be used to press molybdenum sheet, so that molybdenum sheet to follow the molybdenum sheet guide rail moving forward, when the release of molybdenum sheet component, molybdenum sheet guide rail moved back, molybdenum sheet can extend out of the molybdenum sheet guide block outside, through the molybdenum sheet welding component of the upper electrode part and the lower electrode part of the molybdenum sheet tight pressure. Then cut the molybdenum sheet by cutting the molybdenum sheet assembly, so as to achieve the molybdenum sheet welded on the filament foot, the whole process does not require manual operation, high precision, high work efficiency, and high qualified rate of the finished product.
Our company can produce and process molybdenum sheet, molybdenum foil, molybdenum plate, molybdenum wire and workpiece according to the requirements.
