Discussion on cleaning equipment and technology of molybdenum strip
In the production of molybdenum and molybdenum alloy strip foil, in order to meet the current market demand, it is necessary to improve the dimensional tolerance, surface finish, flatness and mechanical properties of products. At present, a large number of inputs have been made in the purification of raw materials, plate shape control, heat treatment and the final finishing process, and good results have been achieved. In addition, in the molybdenum processing industry, there is more and more attention to the surface cleaning process of strip foil.
Oil cleaning molybdenum sheet strip foil surface, is a good method. Oil cleaning is a special cleaning oil as cleaning fluid, because cleaning oil and cold rolling oil are the same type of products, there is an affinity between them, so oil to wash oil, it is much easier than water to wash oil. The oil-cleaned surface looks clean and bright, and the surface has a layer of clean oil film, which protects the surface from abrasion and oxidation. The structure design of the oil cleaning machine is very compact, and the position of the process route is only about 1.3 ~1.5m.
Molybdenum strip as a key material in aviation and aerospace, the material performance, precision and surface quality requirements are constantly improving, thin shape, high precision, high performance, high surface quality, has become an important development direction of modern high precision molybdenum and alloy strip, high efficiency, high surface quality, energy saving and environmental protection of new surface cleaning technology and advanced process control technology, It is an important content of the production process and equipment development of high precision molybdenum and molybdenum alloy strip in the future.
