Molybdenum target material use
Molybdenum target material can form thin film on various substrates, widely used in electronic components and electronic products.
Properties of molybdenum sputtering target Molybdenum sputtering target has the same properties as its source material (pure molybdenum or molybdenum alloy). Molybdenum is a kind of metal element mainly used in iron and steel. After industrial molybdenum oxide is pressed, most of it is directly used in steel making or cast iron. A small amount of molybdenum is smelted into ferro molybdenum or molybdenum foil and then used in steel making. It can improve the strength, hardness, weldability and toughness of the alloy, as well as high temperature and corrosion resistance.
Application of molybdenum sputtering target in flat panel display
In the electronics industry, the application of molybdenum sputtering target is mainly concentrated in the flat display, thin film solar cell electrode and wiring materials and semiconductor barrier material, etc. These materials are based on high melting point, high conductivity, low specific impedance of molybdenum as the base material, good corrosion resistance and environmental protection performance. Molybdenum has the advantages of specific impedance and film stress is only half of chromium, and no environmental pollution problem, has become one of the preferred materials for flat panel display sputtering target. In addition, adding molybdenum to LCD components can greatly improve the brightness, contrast, color and life of the LCD.
Application of molybdenum sputtering target in thin film solar photovoltaic cells
CIGS is an important type of solar cell used to convert sunlight into electricity. CIGS is made up of four elements: copper (Cu), indium (In), gallium (Ga) and selenium (Se). Its full name is copper indium gallium selenium thin film solar cell. CIGS has the advantages of strong light absorption capacity, good power generation stability, high conversion efficiency, long daytime generation time, large power generation, low production cost, short energy recovery period and so on.
The molybdenum target is mainly sprayed to form the electrode layer of CIGS thin film battery.
Molybdenum is located at the bottom of the solar cell. As the backside contact of the solar cell, it plays an important role in nucleation, growth and morphology of CIGS thin film crystals.
Molybdenum sputtering target for touch screen
Molybdenum niobium (MoNb) targets are used by sputtering coatings for conducting, covering and blocking layers in HDTVS, tablets, smartphones and other mobile devices.
Our company can process and customize molybdenum sputtering targe, molybdenum plate, molybdenum rod, molybdenum foil, molybdenum wire, molybdenum hot zone, molybdenum thermocouple. For more information, please contact info@mostenalloy.com.
