Molybdenum foil, molybdenum narrow band introduction
In addition to molybdenum plate, molybdenum rod and molybdenum wire such typical molybdenum products, in fact, molybdenum foil is also a typical molybdenum products. Molybdenum foil is a thin section composed of transition metal molybdenum (Mo) and rare earth elements. Generally speaking, the purity of molybdenum foil is greater than 99.95%, the thickness range is 0.025-0.2mm, the width is greater than 5mm, and the surface state has alkali pickling surface, annealing state and polishing surface. Of course, it will be adjusted according to the different needs of customers.
Molybdenum foil is a silver-gray metal sheet with metallic luster. The melting point of molybdenum foil and molybdenum narrow band is about 2620 ℃. The boiling point of molybdenum foil and molybdenum narrow band is about 5560 ℃. Molybdenum foil and molybdenum narrow band relative density 10.2g/cm3. Molybdenum foil and molybdenum narrow band have high hardness, low coefficient of thermal expansion, high thermal conductivity, small resistivity, good chemical stability and electrochemical performance. At room temperature and pressure, molybdenum foil and molybdenum narrow band will not react with air or water, but under heating conditions, it will be slowly oxidized.
